Well HELLO!!
I'm back with an update on the work we completed last week in our front yard. This time, all the efforts went towards updating the flower beds.
We started off by sprucing up our entire yard about three weeks ago; we removed some small bushes that lined each side of the entry, applied fertilizers, and added grass seeds to the front and back yards. This is the first time we're using an Eco-Lawn in the backyard, it's a drought-tolerant grass that's earth-friendly, sustainable, and perfect for kids, pets, and high foot traffic areas. You can check that post right HERE.
This was the final look in the front yard after removing the two lines of small boxwood bushes.
Still looking bad, but we made progress. However, we had to take some time to recoup! Yard work makes you move every. single. muscle in your body, we were sore and super tired and we needed lots of strength to fight those big bushes by the windows.
1. REMOVING THE BIGGEST BUSHES
We took the bull by the horns, well the mister did. Although, he went the easy route. He used the sawzall to cut off all the branches!
![]() |
| Milwaukee Cordless SAWZALL Reciprocating Saw | Shovel | |
And my job was to dig those roots out all while he kept on working that sawzall there on the ground, breaking those roots. At some points, I thought that the handle on the shovel was going to break. Luckily it didn't, but hey, those roots weren't a joke.
Well, we removed all five bushes and this was the new view... A bunch of branches, roots, and an ugly wall. After cleaning and putting those branches in the car, we headed to the recycling center, and then, we call it a day.
2. CLEANING AND RE-PAINTING THE FOUNDATION WALL
Taking care of that foundation wall was our next step. That paint was peeling off like crazy.
I think you can remove the peeling paint with a pressure washer, but guess what, we don't have one. And since this is a small area, we used what we had, a drill and a wire brush. It worked perfectly.
Well, we removed all five bushes and this was the new view... A bunch of branches, roots, and an ugly wall. After cleaning and putting those branches in the car, we headed to the recycling center, and then, we call it a day.
2. CLEANING AND RE-PAINTING THE FOUNDATION WALL
Taking care of that foundation wall was our next step. That paint was peeling off like crazy.
I think you can remove the peeling paint with a pressure washer, but guess what, we don't have one. And since this is a small area, we used what we had, a drill and a wire brush. It worked perfectly.
![]() |
| Ridgid Drill | 3" Wirecup Brush Drill Attachment | |
After rinsing the wall and letting it dry, I first applied one coat of Behr Masonry, Stucco & Brick Paint - Designed for interior and exterior work, self-priming, alkali, and mildew resistant finish with excellent adhesion, coverage and water repellency, and color retention.
You can tint your paint to match the color of your wall.
3. PLANTING NEW BUSHES
The holes for the new bushes were widened some more. Compost, soil, and a bit of fertilizer were added to the ground to give the bushes a helping hand.
When planting the new bushes have in mind this:
4. WATERING
I can't emphasize enough the importance of watering. I've been doing it daily and many times twice or more during the day.
4. MAKING THE FLOWER EDGE
My task, early the following day, was to make those sharp flower edges. I had one of those landscaping edgers like the one HERE. But, it's damaged, so I had to use this flat shovel.
The secret to making a nice edge is to push the edger 90 degrees into the bed. All along your marked line.
You can tint your paint to match the color of your wall.
![]() |
| Behr Interior/Exterior Masonry Stucco & Brick Paint | Paint Roller | |
I applied the paint with a 9 In. - 3/4 In. high-density roller. It worked great to get the paint into the brick crevices. Although, I had to go with a paintbrush on some areas that the roller didn't get and in the corners and edges.
I waited 24 hours to give the wall a second coat.3. PLANTING NEW BUSHES
The holes for the new bushes were widened some more. Compost, soil, and a bit of fertilizer were added to the ground to give the bushes a helping hand.
When planting the new bushes have in mind this:
- Plant them high, letting the root ball sit higher than the surrounding soil. Planting them too low might cause the root to rot or disease.
- Break up the roots if they're growing in the shape of the container, your new bush will thank you for that.
- Compact the soil, eliminate air pockets for all the roots to have direct contact with the soil.
4. WATERING
I can't emphasize enough the importance of watering. I've been doing it daily and many times twice or more during the day.
- Water the soil abundantly for an easier way to dig those roots out.
- Water while planting to compact the soil.
- Water after planting to settle everything in place.
4. MAKING THE FLOWER EDGE
My task, early the following day, was to make those sharp flower edges. I had one of those landscaping edgers like the one HERE. But, it's damaged, so I had to use this flat shovel.
The secret to making a nice edge is to push the edger 90 degrees into the bed. All along your marked line.
Complete details on how to edge flower beds are right HERE.
5. ADDING MULCH
My BIL helped us with the delivery of the mulch. We covered the front and backyard flower beds with this truckload of mulch.
Although, before bringing that mulch to the flower beds, my BIL convinced me of using landscape fabric to keep weeds at bay.
There is lots of controversy on using landscape fabric in your garden
Some of the pros:
The cons:
We took measurements of how far apart the bushes were planted and brought those measurements to the fabric to make the holes.
Once the fabric was laid in place, the boys started bringing the mulch while I spread it around the bushes.
And here is the before and after of this area:
I still need to plant some more flowers. But, it's looking way better than the before pic.
You can see how the grass has grown in that area where the small bushes used to be.
And here are the two flower beds in our front yard. I think the toughest job is done. But, there are still lots of tasks that need to be done.
Like cleaning those steps and the walkway, painting the handrail, and planting flowers. But hey, I'm super glad about the progress we have made so far!
This weekend I'll be at it again. Stay tuned!!
5. ADDING MULCH
My BIL helped us with the delivery of the mulch. We covered the front and backyard flower beds with this truckload of mulch.
Although, before bringing that mulch to the flower beds, my BIL convinced me of using landscape fabric to keep weeds at bay.
There is lots of controversy on using landscape fabric in your garden
Some of the pros:
- Of course, weed barrier.
- Helps retain soil moisture, reduces evaporation.
- Erosion control on slopes.
The cons:
- Friendly animals like worms can't reach the soil surface to survive.
- the fabric also acts as a barrier for natural nutrients to get to the soil.
- Weeds can still sprout on the layer of mulch that's added on top of the fabric.
We took measurements of how far apart the bushes were planted and brought those measurements to the fabric to make the holes.
Once the fabric was laid in place, the boys started bringing the mulch while I spread it around the bushes.
And here is the before and after of this area:
I still need to plant some more flowers. But, it's looking way better than the before pic.
You can see how the grass has grown in that area where the small bushes used to be.
And here are the two flower beds in our front yard. I think the toughest job is done. But, there are still lots of tasks that need to be done.
This weekend I'll be at it again. Stay tuned!!
*This post contains affiliate links.
New comments are not allowed.