Adding Moldings to your Kitchen Cabinets

With the big problems being taken care of, it was time to put on some beauty!  That’s my word for moldings:  Beauty.
I began working at the bottom of the cabinets, perhaps avoiding the headache of dealing with crown molding.
I set to find a molding to put at the bottom of the cabinets but couldn't find it. I was told it had to be special ordered.
Time was kind of a concern but also price (as usual), it wasn't that cheap. So, I made it myself by getting a wall molding and on the back of that one, attaching another that's called “parting bead”
Both pieces were glued and nailed together. Then, they were cut as needed (mitering the corners). 
They were attached to the bottom of the cabinets like this:
how to add molding at the bottom of kitchen cabinets.
To the left is the wall molding, the two little lines
represent the nails to attach it to the bottom of the cabinets.
diy - builders grade kitchen cabinets upgraded with moldings
Next step was to attach the molding around the base of the range hood; in this case I used this one:
molding used to dress up a diy range hood

adding moldings to oak- builders grade kitchen cabinets

Then, I continued by closing the gap in between the top of the cabinets and the piece of MDF that was placed to close that open space.  This is what was used there:

 It is a very small molding, that once in place looks like this:
builders grade kitchen upgraded with moldings and paint
Another piece of molding was also installed a little bit higher than the one before, pretty similar to the one at the bottom of the cabinets.  It was nailed to the piece of MDF to visually break that big empty space.
On the side of the cabinets overlooking the window, Lattice (¼" x 2") was installed to give those sides the  look of “recessed” panels.

give your kitchen cabinets a better look with moldings- end cabinet design - kitchen window

The crown molding was the last one to be installed.  It wasn’t that bad this time (we had installed it before in our daughter’s bedroom and it was a pain for us to install it that time). Not any more, you can check HERE an easy way to cut crown corners.
After all the moldings were installed, this is how it looked:

Give new life to oak cabinets with moldings, a builder's grade basic kitchen is transformed with crown molding, under cabinet moldings and paint
Just waiting to caulk and fill gaps and holes, sand and paint everything.
The molding at the front of the range hood was glued in place after everything was painted. For that I used half round molding.
Moldings are added to Range hood in kitchen

And this is how it looks once finished.

These are the moldings used:
how to add moldings to kitchen cabinets

For more Kitchen DIY ideas check these out:

how to paint the cabinets.
Install a marble backsplash.
Close the space above the kitchen cabinets
Build a range hood.
Build a fridge enclosure.
Update the kitchen island
Tips about installing recessed lights
Final kitchen reveal
Kitchen cost breakdown
1 ½ Year Later How the Kitchen is Holding up
Build-in Plate Rack
Pull Out Shelves in Pantry
LG Appliances Review and Complain

Enjoy what you read today? Enter your email address below to subscribe to Remodelando la Casa:

Delivered by FeedBurner


  1. I am loving your tutorials on how to do such beautiful additions!

    Thank you!
    Lee Ann

  2. Your work is very beautiful, a lot of great ideas.
    I am working on my kitchen and I think I will combine some of your ideas from the kitchen and laundry room.
    I will also check out that lumber store, I guess I live in the same region than you!
    Did you also buy your plywood there?

  3. Christina,

    I remember your kitchen from back in January and now that I've crossed paths with it again at Addicted 2 Decorating's party, I had to pin this idea. I have the exact same dust gathering issues above my cabinets. This is going on my to do list!

    Thanks for the great tutorials!



  4. It is beautiful! Pinning it1

  5. This took so much patience and attention to detail. It's just beautiful. I saw your link at Savvy Southern Style. Glad I stopped by!

  6. You have the best posts! What a huge difference moldings make to plain cabinets!
    Great instructions!!!!

  7. What a transformation that adding molding makes! Thank you for the wonderful tutorial ... I'm taking notes! Beautiful kitchen!

  8. That looks AMAZING!! I am completely wowed!!!

  9. I love your kitchen. You did a terrific job of updating it.

  10. Wow sweet Christina, you are so talented, can get over how beautiful you turn everything you touch into! The moldings are the icing on the cake, just gorgeous!

  11. Gorgeous! I'm pinning this because I'd love to add some molding to the bottom of our cabinets. Great job!

    I'm a new follower. I hope you'll stop by my blog!

  12. You did an incredible job! I am so impressed. We just got finished with a big remodel as well. I still need to have the molding put around the kitchen window. I would love to see a close up of how you did that area. I know I will be spending more time on your blog!! It is great.

  13. Thanks everyone for all your kind comments!

    To Just Spiff It, installing molding around a window is a post I need to do in the near future. btw you have a no-reply e-mail address.

  14. Really impressed! Everything is very, very clear, open is a description of the problem. It contains the information.

  15. What an excellent tutorial. Really helped me with moldings to choose for closing in my cabinets. Thank you!!!

  16. I'm a sucker for any post that includes a diagram and it looks like you making a ton of progress with your projects. this is a good one, exactly similar to a pro install and one that many kitchens could benefit from. well done Christina.

  17. I love your curtain. What is the fabric - Did you make it or buy it? Your home is such an inspiration!!

    1. Thanks Katie! The fabric is Waverly- Pom Pom Play Spa. You can check how it was done here:

  18. Fantastic renovation!!!! We are going to do pretty much the same- paint oak builder grade cabinets and install molding. Also, marble backslash (love the one you choose), hopefully, will be doing the same hood cover. We are not DIY, unfortunately, and will hire a contractor to do all that. Will use your posts to show our contractor how it should look like! Thank you for all step-by step postings!

  19. That's so right, Slavalera, you're doing pretty much the same! Thanks for stopping by! I would love to see the before and after of your kitchen reno, very exciting! Good luck with it!

  20. I love your kitchen and can't wait for my builder grade kitchen to look like that! I had a oak wall in my family room that I stained gray and covered with a white wax and that was a really cool treatment, but I'm going to stick with white for the kitchen! Thanks for the inspiration!

  21. Terrific how you show all the steps and then at the end, all the molding types on one page. We're redoing our kitchen and want to paint some cabinets and leave some oak and the best way to tie in is to do what you've done above the cabinets. Thanks again

    1. Thanks Kathy! Two-tone kitchen cabinets are the rage right now. I would love to see how you work them out!

  22. Cristina,

    Love your cabinets! I want to spiff up my plain cabinet doors by adding 1/4"x1/2" trim molding, such as you did on your range hood, but I can't find it anywhere in that size. Help, please!


    1. Thanks Gini! Have you tried a lumber yard? That's where I buy most of my moldings, and they're slightly cheaper than at the big box stores.

  23. Hi Cristina, did you router the inside of the 1/4"x1/2" trim molding placed on the cabinets that are on either side of the sink or add small moldings? I assume the 1/4"x1/2" trim was put on before the trim on bottom of cabinet? kitchen looks great.

  24. No, Kevin, I didn't even have a router at that time. I added lattice ¼" x 2" around the perimeter of the cabinets (sides), it was also done to even out the lip from the front face of the cabinets. I did it backwards, I first installed the trim on the bottom of all the cabinets (leaving it ¼"outside on those sides), and then glued and nailed the lattice in place.

    1. Ooops Kevin, I just read your comment again and yeah, I did use a very small molding around the perimeter of the cabinets(sides), along side the lattice. It's a tiny molding you have to cut it by hand.

    2. Thanks for the replay, glad my eyes weren't playing tricks on me. One other question regarding the same area if you don't mind. Is your "stile" nearer the cabinet front wider than the one near the wall when you take into consideration the side frame of the cabinet? I was thinking of filling in the seam where the stile meets the cabinet and make the other trim around the perimeter match the width of the stile touching the front of the cabinet. so width would be the width of the stile plus cabinet face frame side

    3. You have sharp eyes! :) And yes, you're right and RIGHT! That stile is narrower than the one closest to the frame. The way you're thinking on doing it it's the right way to go about it. I didn't have the tools at the time to cut those long skinny pieces of wood. I would love to see your work!

  25. Cristina, my cabinets were professionally sprayed. I do have the oil based paint they used for touch-ups. Could I add molding at this point and just use the paint they gave me?

  26. I am going to do exactly this to my cabinets. I have a 12" gap to the ceiling I need to fill up. Is this too big a gap? How big was yours?

  27. very very nice .want ask how can i put wood good on wall

  28. What paint did you use? It looks like a nice finish.

    1. I used Benjamin Moore Aura - Satin finish - Navajo white

  29. Looks beautiful! Where did you get the window valance?

Copyright © Remodelando la Casa. Designed by OddThemes